Dillon Precision Rifle 3 Die Set 308 Winchester

Dillon Precision Rifle 3 Die Set 308 Winchester

Sizing/Depriming Die: The sizing/depriming die is full-length and sized to minimum tolerances to size cases down to function in both semi and fully automatic firearms. We strongly suggest that a headspace case gauge be used to correctly adjust the size die.

In the event of a stuck case, the design of the depriming assembly allows it to function as a stuck case remover.

Bullet Seating Die: Dillon bullet seating dies are internally designed to keep the bullet straight throughout the seating process. Once properly adjusted, the only measurable runout will be that which is inherent in the bullet.

Crimp Die: The taper crimp die is also specially configured to center both the case neck and the case body, thereby aligning the entire cartridge for a more uniform crimp. Dillon rifle steel dies are designed to meet the more rigid requirements for both accuracy and precision demanded by today's marksman. A taper crimp die is preferred for loading ammunition intended to be used in semiautomatic firearms with detachable box magazines, and in lever-action firearms with tubular magazines.

It is strongly recommend to use a headspace case gauge when loading bottleneck rifle cartridges.

Rifle headspace case gauges assist in proper size die adjustment and in checking cases for whether they need to be trimmed or will chamber. Essential for long case life, especially with semi-automatic firearms!

NOTE: These dies are NOT compatible with the Dillon Precision Square Deal B.