RPP Comet Brake 45-70/.45LC .746" OD/5/8 X 24 Tpi Black Nitride

RPP Comet Brake 45-70/.45LC .746" OD/5/8 X 24 Tpi Black Nitride

The "Comet Brake" is designed to be a slim, flush fit and aggressive rifle muzzle brake that works especially well to reduce felt recoil.

Each brake is made to match the exact OD (outer diameter) and the thread pitch (tpi) of the rifle make/model that's listed.

Your rifle MUST be threaded to use this brake.

If you plan to get your rifle threaded by a gunsmith, provide them with the exact specs listed.

Classic Comet Brake Features:

• Tough, stress proof steel construction (salt bath black nitride 4140 steel)
• Reduces recoil and muzzle flash by approximately 25%
• Not a one-size-fits-all (1.65" total length, 1" hangs past barrel when installed)
• Designed for optimal performance and accuracy with individual calibers
• To install, hand tighten and use blue Loctite, no indexing or torque specs 

MUZZLE BRAKE:

Reduces recoil and muzzle flash by approximately 25%

SPECS:

Henry X Series 45-70 or 45 Colt (.746" OD / 5/8 x 24 tpi)

CLASSIC COMET BRAKE:

Scroll down below to learn more

INSTALLATION:

Blue Loctite (not red) + hand tighten onto threaded barrel BLUE LOCTITE + HAND TIGHTENED ONTO THREADED BARREL