RPP Comet Muzzle Brake Marlin 1894 .357 1/2X28 thr Nitride

RPP Comet Muzzle Brake Marlin 1894 .357 1/2X28 thr Nitride

The "Comet Brake" is designed to be a slim, flush fit and aggressive rifle muzzle brake that works especially well to reduce felt recoil.

Each brake is made to match the exact OD (outer diameter) and the thread pitch (tpi) of the rifle make/model that's listed.

Your rifle MUST be threaded to use this brake.

If you plan to get your rifle threaded by a gunsmith, provide them with the exact specs listed.

• Tough, stress proof steel construction (salt bath black nitride 4140 steel)
• Reduces recoil and muzzle flash by approximately 25%
• Not a one-size-fits-all (1.65" total length, 1" hangs past barrel when installed)
• Designed for optimal performance and accuracy with individual calibers
• To install, hand tighten and use blue Loctite, no indexing or torque specs 

FITS Original Marlin Dark Rifles (made before 2020):

This brake is made for the original Remington-made Marlin Dark 1895 rifles: smaller barrel diameter (Ilion, NY barrel stamp)

REMINGTON SERIAL # STARTS W/ MR:

Marlin-Remington Dark Series 357 Mag (.746" OD / 1/2 x 28 tpi)

INSTALLATION:

Blue Loctite (not red) + hand tighten onto threaded barrel BLUE LOCTITE + HAND TIGHTENED ONTO THREADED BARREL